Agriplast Protected Cultivation Private Limited

The Bluelab pH Pen is a hardy, compact, and accurate pH and temperature pen for using in nutrient solution. Use the pH pen to quickly and accurately know if your solution is too acidic or alkaline, or too hot or cold. Designed for everyday use, the Bluelab pH Pen helps you to keep your plants in the  optimal pH and temperature range so that your plants can thrive. 

Getting started is easy. Follow the instructions to hydrate and calibrate your pen, and submerge the probe in your nutrient reservoir to view the measurement on the display. 

Features

• Fully waterproof - not just water resistant
• Simple two-point calibration process for accuracy
• One-year peace-of-mind warranty
• Automatic temperature compensation for accurate readings everywhere
• Auto-off function to extend battery life
• 1 AAA battery included - simply power on and go

Healthy growing plants, just like humans, need a balanced diet of appropriate nutrients (food). However, plants can only access these nutrients when the nutrient solution is within a certain pH range.

From a water chemistry perspective, pH (potential Hydrogen) plays a pivotal role in making the nutrients in your solution soluble so that they can be accessed by your plants. That’s why if your growing solution becomes too acidic or too alkaline, the plants won’t be able to get access to the nutrients they need to grow. The temperature of your growing solution is equally important as having a solution that’s too hot or too cold can affect growth rate and structure.

To help your plants thrive, get the fundamentals right by measuring pH and temperature to ensure that these are always in the optimal range.


A compact and robust handheld solution
Everyday accuracy of the fundamentals

This user-friendly and hardy handheld pen will take measurements in increments of 0.1 pH and is fully temperature compensated, so you can expect accurate readings every time.

Our products are designed and built for grower environments - not the lab - so you can relax knowing that your pen can withstand the knocks, drops and deep-water plunges that come with everyday growing. In fact, the fully waterproof Bluelab pH Pen is designed to float when it lands up in your reservoir.

The Bluelab pH Pen was designed and assembled in New Zealand from local and imported components. Tried and trusted by growers all over the world, this essential tool is one of our top-selling products.

Conductivity and pH are connected. When preparing a new nutrient solution, you'll need to add the appropriate amount of nutrients according to the plants' needs. Once you’ve checked the conductivity (EC or PPM), which confirms whether the nutrient levels are correct, you'll then need to regularly adjust the pH to ensure those nutrients are available to the plant.

After all, nutrients are expensive so it’s important that you always optimise them.

With Bluelab’s Conductivity Pen, you can take measurements of your nutrient solution to ensure that your plants truly flourish.

Want to combine your Bluelab pH Pen with our Conductivity Pen? View the Bluelab Grower’s Toolbox.

The Bluelab Multimedia pH Meter gives you fast and accurate pH measurements directly in the root zone. The Bluelab Leap pH Probe can be used in nutrient solutions.

Use the reinforced spear-tip probe (or included dibber) to create a hole directly in the root zone, or submerge the probe tip in solution. The pH measurement will show onscreen.

Features

• Fast sensor response for quicker readings on the go
• Multimedia friendly for measurements across a range of environments
• Toughened spear tip for direct root-zone measurements
• Simple two-point calibration process for ongoing accuracy
• Backlit LCD display to capture measurements with ease
• 2 x AAA alkaline batteries included
• Warranty - Five-year guarantee for the Bluelab Multimedia pH Meter; six-month guarantee for the Bluelab Leap pH Probe (proof of purchase is required)

Maintain and calibrate your Bluelab Multimedia pH Meter

Combine the Bluelab Multimedia pH Meter and Bluelab Leap pH Probe to take fast and accurate measurements in nutrient solution, soil, coco coir, rockwool, potting mix and many other media types.

Calibration is simple with one push button on the meter and fresh Bluelab Calibration Solutions. A successful calibration indicator is displayed on screen; after 30 days, this will disappear and you’ll need to recalibrate to ensure ongoing accuracy.

Why not add on some Bluelab Solutions or the convenient Bluelab Carry Case? Replacement Bluelab pH Probes or Leap pH Probes are available too.

Everyday accuracy of pH

This meter’s impressive and robust Leap pH Probe will take quick and accurate pH measurements in increments of 0.1 pH in a variety of growing media.

Built for growers

All our products are designed and built with growers, for growers - so you can relax knowing that you’ve invested in a meter that will help you carry out the essential tasks that come with everyday growing.

The Bluelab Multimedia pH Meter was designed and assembled in New Zealand from local and imported components. Tried and trusted by growers all over the world, the Bluelab Multimedia pH Meter has a five-year warranty (six months for the Leap pH Probe).

The ultimate multimedia testing kit

Bluelab’s Multimedia pH Meter will measure the pH of your growing medium, but you’ll also need to check that you aren’t over- or under-feeding your plants.

Nutrients can be expensive so it’s important that you always optimise them. Conductivity (EC or PPM) is a fundamental parameter that will help you ensure that your plants are always getting the right amount of food.

The Bluelab Pulse Meter takes quick and accurate measurements of conductivity, moisture and temperature in a variety of growing media. Combine the Multimedia pH Meter and Pulse Meter to create the ultimate multimedia toolkit, ensuring that your plants have everything they need to flourish.

Measure pH, conductivity, and temperature on the go. The Bluelab Combo Meter Plus provides the ultimate convenience by taking care of all three nutrient uptake fundamentals simultaneously.

Not only that, but this multi-parameter meter and its probes feature a brilliantly simple design. The Bluelab Leap pH Probe is easy to use, clean and calibrate; when the time comes, it’s also easy to replace. The Leap pH probe allows you to take pH readings directly at the root zone. Likewise, the Bluelab Conductivity Probe has straightforward functionality, requiring no further calibration.

Features

• Measures pH, conductivity and temperature on the go
• Brilliantly simple design that’s easy to use, clean and calibrate
• Backlit display to capture every measurement with ease
• Leap pH Probe is safely stored and ready to start measuring straight away
• Includes calibration-free Conductivity Probe
• 2-metre cable for measuring in hard-to-reach locations
• Automatic temperature compensation for accurate readings everywhere
• Customise scales to your preference - conductivity in EC, CF, PPM 500 (TDS) or PPM 700; temperature in °C or °F
• Warranty - Comes with a 5-year limited written warranty. Proof of purchase is required.

Three-in-one portable solution

The fundamental parameters of pH, conductivity and temperature all play a pivotal role in driving optimal nutrient uptake. With Bluelab’s Combo Meter Plus, you can measure all these fundamentals in one convenient, portable device.

While conductivity indicates the total amount of nutrients in your solution, pH (potential Hydrogen) shows how acidic or alkaline your medium is, which determines nutrient absorption. Temperature affects your plants’ growth rate and structure.

Optimise your root zone

The Bluelab Combo Meter Plus takes everything you love about the Combo Meter and combines it with our toughest probe – the Bluelab Leap pH Probe.

Our advanced probe technology ensures that you get ultra-fast pH measurements direct from the root zone or in solutions, helping you unlock your plants’ full potential.

Built for growers

All our products are designed with growers, for growers – so you can be confident that the Bluelab Combo Meter Plus will help you carry out essential tasks with ease. In addition, the Leap pH Probe’s toughened tip ensures that it can withstand the knocks that come with everyday growing. Designed and assembled in New Zealand from local and imported components.

The Bluelab Combo Meter Plus measures pH, conductivity and temperature in substrates, nutrient reservoirs, run-off and water supply. What’s more, this meter can be used on the go, giving you fast and accurate readings when and where you need them.

Expand your toolkit

The Bluelab Carry Case is the perfect companion for your Bluelab Combo Meter Plus. This carry case will help to free up your hands so that you can take measurements while the firm outer casing protects your meter from the knocks and drops that come with everyday growing.

Featuring pockets as well as internal and external straps, you’ll be able to use the Bluelab Carry Case to store and protect your Bluelab Combo Meter Plus and all its accessories, giving you complete peace of mind.

In addition, you can stock your carry case with Bluelab’s Probe Care Kits to make cleaning, maintenance and calibration even easier.

Measure pH, conductivity and temperature on the go. The Bluelab Combo Meter provides the ultimate convenience by taking care of all three nutrient uptake fundamentals simultaneously.

Not only that, but this multi-parameter meter and its probes feature a brilliantly simple design. The Bluelab pH Probe is easy to use, clean and calibrate; when the time comes, it’s also easy to replace. Likewise, the Bluelab Conductivity Probe has straightforward functionality, requiring no further calibration.

Features

• Measures pH, conductivity and temperature on the go
• Brilliantly simple design that’s easy to use, clean and calibrate
• Backlit display to capture every measurement with ease
• Includes a pH Probe and Conductivity Probe to cover all your nutrient uptake fundamentals
• 2-metre cable for measuring in hard-to-reach locations
• Customise scales to your preference - conductivity in EC, CF, PPM 500 (TDS) or PPM 700; temperature in °C or °F
• Warranty - Five-year guarantee for the Bluelab Combo Meter (proof of purchase is required)

The science behind healthier plants

The fundamental parameters of pH, conductivity and temperature all play a pivotal role in driving optimal plant health. By regularly measuring the fundamentals, the Bluelab Combo Meter will enable you to optimise your plants’ nutrient uptake.

While conductivity indicates the total amount of nutrients in your solution, pH (potential Hydrogen) shows how acidic or alkaline your medium is, which determines nutrient absorption. Temperature affects your plants’ growth rate and structure.

The Bluelab Combo Meter measures pH, conductivity and temperature in nutrient reservoirs, run-off and water supply. What’s more, this meter can be used on the go, giving you fast and accurate readings when and where you need them.

Brilliantly simple design

The Bluelab Combo Meter provides the ultimate convenience by taking care of all three nutrient uptake fundamentals simultaneously.

Not only that, but this multi-parameter meter and its probes feature a brilliantly simple design. The Bluelab pH Probe is easy to use, clean and calibrate; when the time comes, it’s also easy to replace. Likewise, the Bluelab Conductivity Probe has straightforward functionality, requiring no further calibration.

Built for growers

All our products are designed with growers, for growers – so you can be confident that the Bluelab Combo Meter will help you carry out the essential tasks of everyday growing with ease. Designed and assembled in New Zealand from local and imported components.

Expand your toolkit

The Bluelab Carry Case is the perfect companion for your Combo Meter. This carry case will help to free up your hands so that you can take measurements while the firm outer casing protects your meter from the knocks and drops that come with everyday growing.

Featuring pockets as well as internal and external straps, you’ll be able to use the Bluelab Carry Case to store and protect your Bluelab Combo Meter and all its accessories, giving you complete peace of mind.

In addition, you can stock your carry case with Bluelab’s Probe Care Kits to make cleaning, maintenance and calibration even easier.

Your Bluelab Probe Care Kit – pH and Conductivity contains: 

• Probe care instructions 
• 18 ml single-use Bluelab Solution Sachets - two each of: pH 7.0, pH 4.0, KCl and 2.77 EC standard solution 
• Three plastic cups 
• Bluelab pH Probe Cleaner 
• Bluelab Conductivity Probe Cleaner 
• Toothbrush for cleaning your pH probe 
• Chamois for cleaning your conductivity probe 
• Packaging may vary
• Warranty - There is currently no applicable warranty for this product.

The Bluelab Conductivity Pen is a robust and reliable solution for measuring nutrient concentration and temperature in solution. With the Bluelab Conductivity Pen, you’ll ensure that your plants are getting the nutrients they need for superior plant health. 


The Conductivity Pen is factory calibrated and ready to use out of the box. Simply submerge the probe in your nutrient reservoir and take the measurement shown by the LED display. 

• Fully waterproof, not just water-resistant
• Selectable measurement units so you can customise with your preferences
• Flat electrode for easier cleaning and maintenance
• Hold reading function to capture every measurement with ease
• Automatic temperature compensation for accurate readings anywhere
• Auto-off function to extend battery life
• 1 x AAA alkaline battery included, getting you started immediately

All plants need access to the right amount of food (nutrients) so that they can grow and thrive. Over- or under-feeding your plants can result in the waste of expensive nutrient resources.

The easiest way to keep track of the amount of nutrients in your solution is to regularly measure conductivity, which refers to the total ionic content (dissolved salts) in a solution. From a scientific perspective, when nutrients are added, this creates the potential for electricity to move through a solution, increasing the electrical conductivity.

Measuring the temperature of your solution is equally important, as - if it’s too hot or too cold - this can affect the plants’ growth rate and structure.


A compact and hardy handheld solution
Accurate and customisable measurements

Providing quick and accurate readings at the click of a button, you can rest assured that the user-friendly Bluelab Conductivity Pen will give you reliable results, every single time.

In addition, this product offers a range of in-built measurement units, so you’ll be able to customise it according to your preference. For conductivity readings, you can choose between EC, CF, PPM 500 (TDS) or PPM 700; for temperature, you can select C or F.

All our products are designed for the grower’s environment – not the lab – so you can be confident that the Bluelab Conductivity Pen can handle the knocks and drops that come with daily use. This fully waterproof product will even float when it lands up in your reservoir. Designed and assembled in New Zealand from local and imported components.

As a grower, your solution’s pH (potential Hydrogen) is the most critical fundamental measurement to track. It plays a crucial role in making nutrients soluble in water so that they can be accessed by your plants.

By measuring conductivity, temperature and pH, you’ll not only be actively managing your nutrient levels but also making sure that your plants have access to the food they need. This will lead to healthier, thriving plants and improved crop yield. Start tracking the fundamentals today.

Ready to combine your Conductivity Pen with the Bluelab pH Pen? View the Bluelab Grower’s Toolbox.

The Bluelab Pulse Meter uses two stainless steel probes to measure EC, moisture level and temperature. With the Pulse Meter, you’ll ensure that your medium growing environment is optimized for your plants to thrive.

The Pulse Meter pairs with the Pulse mobile app where you can read your measurements then store almost 2000 readings and notes. Just insert the two probes into your substrate and take measurements with a click of the button.

Features

• Measure EC, moisture and temperature directly in the root zone
• Lightning-fast: get three measurements with a single click
• View, store and compare all your measurements in the Pulse app
• Robust 8”/200 mm long-format stainless steel probes provide deeper insight
• Works in a variety of growing substrates and nutrient solution
• Move faster with Blink – get quick in- or out-of-range measurement indicators on the Pulse Meter
• Pulse App available in English, Spanish, Dutch and German
• Warranty - Comes with a 1-year limited written warranty. Proof of purchase required.

No more pour-throughs, slurries or extractions

The Bluelab Pulse Meter will enable you to accurately measure EC, moisture and temperature with a single click. When you optimise your root zone, you’ll be able to unlock your plants’ full potential.

All plants need the right amount of food (nutrients) in order to thrive; measuring conductivity will ensure that your plants have access to the right amount of nutrients at every growth stage.

You also need to measure moisture so that you can optimise your irrigation cycles and water consumption while controlling the risk of root infections. Lastly, by regularly measuring temperature, you’ll be able to spot temperature fluctuations and optimise root function.

Lightning-fast measurements

The robust Bluelab Pulse Meter will enable you to measure faster than ever before, giving you three different measurements in under 10 seconds.

What’s more, you can use the Bluelab Pulse Meter in a variety of growing media, including soil, potting mixes and coco coir blends, as well as nutrient solutions. This meter’s built-in depth gauge will also ensure that you get consistent measurements with every reading.

Made in New Zealand with growers in mind

All our products are created with growers, for growers - so you can relax knowing that your meter will be able to withstand the knocks and drops that come with everyday growing.

Compare on the go with Blink and Pulse App

With the Bluelab Pulse Meter, you’ll be able to measure faster and you can also use this meter’s Blink technology to set your best-performing plants as the benchmark and get instantaneous visual indicators showing you how your crop compares.

What’s more, the Pulse App will unlock new insights by allowing you to take notes about your plants and measurements on the go. Use these powerful resources to discover the secrets behind your top plants’ success while storing, exporting and analysing your plant data.

There’s no need for manual data collection; get access to game-changing insights with Blink and the Pulse App today.

The Bluelab pH Controller maintains consistent pH levels in your reservoir with automated dosing.

Features

• Automate pH control in reservoirs of up to 200 US gallons/760 litres
• 10 ml/min peristaltic pump delivers precise control
• Controls pH in the up (alkali) or down (acid) direction
• In-built safety lockouts prevent overdosing
• Dosing routine allows for effective mixing before next dose
• Auto-resume dosing when restarting after power loss
• High and low alarms to alert you when pH is out of range
• Acid- and alkali-resistant delivery tubing
• 2-metre/6-ft probe and power cable lengths and 4-metre/13.12-ft total tubing for best positioning and viewing
• Flexible mounting options for walls, posts and racks
• Warranty - Two-year limited guarantee (proof of purchase required); six months for the Bluelab pH Probe.

Save time and enjoy peace of mind

The fuss-free Bluelab pH Controller will enable you to continuously maintain perfect pH levels in your reservoir, allowing you to walk away with complete peace of mind knowing that your crops are in safe hands.

That’s because the Bluelab pH Controller will be automatically dosing your reservoir 24/7 to ensure that key nutrients are soluble and therefore available to your plants at all times, creating the conditions for ideal nutrient uptake.

Forget spot checks and manual adjustments – now you can effortlessly enjoy thriving plant health and save thousands of hours without compromising on quality.

Fine-tune your reservoir pH

The Bluelab pH Controller takes the complexity out of pH management, making precision easier than ever before. That’s because the in-built peristaltic pump provides precise control, delivering doses within a 0.1 pH tolerance.

The Bluelab pH Controller is also easy to use and programme; simply choose the pH control direction that’s best for your growing setup in the settings. You can either adjust for the pH-up (alkali) or pH-down (acid) direction.

In addition, this controller comes with a temperature probe, ensuring that all your pH measurements and doses will be automatically compensated for temperature. Simply set your pH target and let the Bluelab pH Controller do the rest.

Plant-safe pH management

The versatile and hard-working Bluelab pH Controller has a number of features that have been designed to put the safety of your plants first.

You can set discreet visual high and low alarms for your preferred pH targets; these alarms will let you know whenever your pH is out of range. To help keep your plants safe from excessive doses, dosing will not occur whenever your controller is in alarm mode.

Stabilise your pH conditions

In recirculating and recycled reservoirs, your pH is constantly changing. That’s because the nutrient composition will change according to what the plants need.

And that’s where the Bluelab pH Controller can help – it will automatically track and adjust the pH levels in your reservoir. After all, when you keep pH and temperature steady, you’ll end up with healthier plants, improving both yield and quality.

Built for growers

All our products are built in New Zealand with growers, for growers – this means you can be confident that your water-resistant Bluelab pH Controller can withstand the splashes that come with everyday growing. Designed and assembled in New Zealand from local and imported components.

The Bluelab pH Controller Connect maintains consistent pH levels in your reservoir with automated dosing.

Features

• View your reservoir pH on your mobile phone no matter where you are
• Automate pH control in reservoirs of up to 200 US gallons/760 litres
• 10 ml/min peristaltic pump delivers precise control
• Controls pH in the up (alkali) or down (acid) direction
• In-built safety lockouts prevent overdosing
• Dosing routine allows for effective mixing before next dose
• Auto-resume dosing when restarting after power loss
• High and low alarms to alert you when pH is out of range
• Acid- and alkali-resistant delivery tubing
• 2-metre/6-ft probe and power cable lengths and 4-metre/13.12-ft total tubing for best positioning and viewing
• Easy access to Bluelab Connect software (download here)
• Warranty - Two-year guarantee for the Bluelab pH Controller Connect and Bluelab Temperature Probe; six-month guarantee for the Bluelab pH Probe (proof of purchase is required).

Save time and enjoy peace of mind

The fuss-free Bluelab pH Controller Connect will enable you to continuously maintain perfect pH levels in your reservoir, allowing you to walk away with complete peace of mind knowing that your crops are in safe hands.

That’s because the Bluelab pH Controller Connect will automatically dose your reservoir 24/7 to ensure that key nutrients are soluble and therefore available to your plants at all times, creating the conditions for ideal nutrient uptake.

Forget spot checks and manual adjustments – now you can effortlessly enjoy thriving plant health and save thousands of hours without compromising on quality.

Fine-tune your reservoir pH

The Bluelab pH Controller Connect takes the complexity out of pH management, making precision easier than ever before. That’s because the in-built peristaltic pump provides precise control, delivering doses within a 0.1 pH tolerance.

The Bluelab pH Controller Connect is also easy to use and programme; simply choose the pH control direction that’s best for your growing setup in the settings. You can either adjust for the pH-up (alkali) or pH-down (acid) direction.

In addition, this controller comes with a temperature probe, ensuring that all your pH measurements and doses will be automatically compensated for temperature. Simply set your pH target and let the Bluelab pH Controller Connect do the rest.

View your data remotely

The Bluelab pH Controller Connect allows you to stay connected to your reservoir pH 24/7.

To connect, you’ll need to purchase a Connect Stick and download our free Connect software. Once installed on your computer, you can set up an account for you and your team members to use. All they need to do is download the free Bluelab Connect mobile app and connect using the login. You can add multiple devices to the same account.

Not only will you be able to view the data being collected by your Bluelab pH Controller Connect, you’ll also receive real-time notifications of any alarms you have set up. Get connected today.

Plant-safe pH management

The versatile and hard-working Bluelab pH Controller Connect has a number of features that have been designed to put the safety of your plants first.

You can set discreet visual high and low alarms for your preferred pH targets; these alarms will let you know whenever your pH is out of range. To help keep your plants safe from excessive doses, dosing will not occur whenever your controller is in alarm mode.

Dependable double-junction pH probe technology that's built to last

Features

• Double-junction probe reduces reference contamination, extending longevity
• Fully waterproof - not just water resistant
• BNC connector allows use with all other compatible Bluelab and Autogrow products
• 2-metre cable for measuring in hard-to-reach locations
• Use the included storage cap with KCl to lengthen probe’s lifespan
• Fast sensor response ensures quick and accurate measurements
• Polycarbonate housing for long-lasting strength
• Effective in solutions of 0.2 EC and above
• Warranty - Six-month guarantee for the Bluelab pH Probe (proof of purchase is required).

Understand the science behind healthy plants

Just like humans, all growing plants need a balanced diet of nutrients (food) in order to thrive. However, your plants will only be able to access these nutrients if the nutrient solution is within a particular pH range.

From a water chemistry perspective, pH (potential Hydrogen) plays a critical role in making nutrients soluble so that they can be absorbed by your plants. When your growing solution becomes too acidic or too alkaline, your plants won’t be able to access the nutrients they need to grow.

Get the fundamentals of growing right by regularly measuring pH to ensure that this is always within the optimal range.

Accurate and quick pH measurements

The durable Bluelab pH Probe has been designed with longevity in mind, with a double-junction probe, polycarbonate housing and high-quality electrical components.

Created with advanced and affordable technology, you can rely on Bluelab’s pH Probe to give you accurate and fast measurements every single time.

Built for growers

All our products are designed with growers, for growers – so you can be confident that the Bluelab pH Probe will help you carry out the essential tasks of everyday growing with ease. This fully waterproof product can even be left inside your reservoir for continual monitoring or spot checking. Designed and assembled in New Zealand from local and imported components.

Extend the life of your pH probe

You need to regularly clean and maintain your Bluelab pH Probe to ensure its ongoing accuracy and longevity.

Use Bluelab’s Probe Care Kit, which contains everything you need to clean and care for your pH probe. Every time you clean your probe, calibrate it using Bluelab Calibration Solutions.

In addition, boost your probe’s lifespan by ensuring that its tip stays wet at all times. Use the included storage cap whenever you’re not using your probe and regularly top up the amount of KCl inside the cap.

This probe is compatible with all Bluelab products with a corresponding BNC connector, such as the Combo Meter and Guardian Monitor.

• Case of six bottles
• Contains 500 ml/16.9 fl oz 
• Boost your pH products’ longevity with regular cleaning and calibration 
• Warranty - There is currently no applicable warranty for this product.

• Case of six bottles
• Contains 250 ml/8.4 fl oz
• Improve EC/PPM accuracy with regular cleaning
• Warranty - There is currently no applicable warranty for this product.

• Case of six bottles
• Contains 500 ml/16.9 fl oz 
• Boost your pH products’ longevity with regular cleaning and calibration 
• Warranty - There is currently no applicable warranty for this product.

• Case of six bottles
• Contains 250 ml/8.4 fl oz 
• Boost your pH products’ longevity with regular cleaning and calibration 
• Warranty - There is currently no applicable warranty for this product.

Accurate direct pH measurements in any substrate in seconds

Features

• Reinforced spear-tip for fast, direct measurement in substrates
• Effective in soil, coco coir blends, rockwool, potting mixes and solution
• Double-junction probe reduces reference contamination, extending longevity
• Fast sensor response for quick and accurate measurements
• Suitable for use with the Bluelab Combo Meter, Bluelab Combo Meter Plus and Bluelab Multimedia pH Meter
• BNC connector is covered to prevent corrosion
• Warranty - Six-month guarantee for the Bluelab Leap pH Probe (proof of purchase is required)

Understand plant health fundamentals

All healthy plants – just like humans - need a balanced diet of nutrients (food) in order to grow. However, plants can only get access to these nutrients if their growing medium has the correct pH range.

From a water chemistry perspective, pH (potential Hydrogen) plays a pivotal role in making nutrients soluble so that they can be absorbed by plants. When the growing medium becomes too acidic or too alkaline, your plants won’t be able to access the nutrients they need to thrive.

Get the fundamentals of growing right by regularly measuring pH to ensure that this is always within the optimal range.

Accurate and fast pH measurements

Our advanced probe technology ensures that you get lightning-fast pH measurements direct from the root zone or in solutions.

Ready to take your growing to the next level - why not upgrade your Bluelab Combo Meter or Bluelab Multimedia pH Meter by adding the Leap pH Probe?

Built for growers

All our products are designed with growers, for growers – so you can be confident that the Bluelab Leap pH Probe will help you carry out essential tasks with ease. In addition, the probe’s toughened tip ensures that it can withstand the knocks that come with everyday growing. Designed and assembled in New Zealand from local and imported components.

Boost the longevity of your pH probe

You need to regularly clean and maintain your Bluelab Leap pH Probe to ensure its ongoing accuracy and longevity.

Bluelab’s Probe Care Kit contains everything you need to clean and care for your pH probe. Once you’ve finished cleaning your probe, calibrate it with Bluelab’s Calibration Solutions. You’ll need to calibrate your probe every time you clean it.

In addition, you can extend your probe’s lifespan by ensuring that its tip stays wet at all times. Use the included storage cap whenever you’re not using your probe and regularly top up the amount of KCl inside the cap.

Your Bluelab Probe Care Kit – pH contains: 

• Probe care instructions 
• 18 ml single-use Bluelab Solution Sachets - two each of: pH 7.0, pH 4.0 and KCl solutions 
• Three plastic cups 
• Bluelab pH Probe Cleaner 
• Toothbrush for cleaning your pH probe 
• Packaging may vary
• Warranty - There is currently no applicable warranty for this product.

A replaceable double-junction pH probe for your Bluelab Guardian Monitor Connect Inline

Features

• Double-junction probe reduces reference contamination, extending longevity
• 3/4” NPT thread fits inline mounting; use with 1” adapter
• Fully waterproof - not just water resistant
• Pressure rating of 7 bar pressure or 100 psi to withstand line pressure and turbulence
• Liquid flow naturally cleans the flat pH measurement surface
• Adapted internal structure for mounting in any direction
• 3-metre cable for measuring in hard-to-reach locations
• Fast sensor response ensures quick and accurate measurements
• Effective in solutions of 0.2 EC and above
• Warranty - One-year limited guarantee (proof of purchase required)

Create the optimal conditions for nutrient uptake

All plants need a balanced diet of nutrients in order to thrive. However, your plants will only be able to access these nutrients if the nutrient solution is within a particular pH range.

From a water chemistry perspective, pH (potential Hydrogen) plays a critical role in making nutrients soluble so that they can be absorbed by your plants. When your nutrient solution becomes too acidic or too alkaline, your plants won’t be able to access the nutrients they need.

Create the optimal conditions for nutrient uptake by measuring pH directly in your nutrient line to ensure that this is always within the optimal range.

Continuous and accurate pH measurements

The durable Bluelab pH Probe Inline has been designed with longevity in mind, with a double-junction probe, high-pressure housing and high-quality electrical components.

Created with advanced and affordable technology, you can rely on Bluelab’s pH Probe Inline to send continuously accurate measurements direct from your nutrient feed line to your Bluelab Guardian Monitor Connect Inline.

Built for growers

All our products are designed with growers, for growers – so you can be confident that the Bluelab pH Probe Inline will help you carry out the essential tasks of everyday growing with ease. Designed and assembled in New Zealand from local and imported components.

Extend the life of your pH probe

Although the Bluelab pH Probe Inline has been designed to self-clean, you should still clean and maintain your probe periodically to ensure its ongoing accuracy and longevity.

Use Bluelab’s Probe Care Kit, which contains everything you need to clean and care for your pH probe. Every time you clean your probe, calibrate it using Bluelab calibration solutions.

This replaceable probe should only be used with the Bluelab Guardian Monitor Connect Inline.

The Bluelab Truncheon Nutrient Meter and Commercial Truncheon Meter are robust and reliable everyday tools for measuring nutrient concentration in solution. With the Truncheon, you’ll ensure that your plants are getting the nutrients they need for superior plant health.

Our Truncheon is factory calibrated with no moving parts or switches. Simply submerge the probe in your nutrient reservoir and take the reading shown by the LED display.

Features

• Robust and reliable construction for long-lasting value
• Fully waterproof; splash, submerge or sink - we've got you covered
• Automatically detects liquids and bright LEDS indicate measurement for brilliantly simple functionality
• Long-format design for mixing and measuring nutrient reservoirs simultaneously
• No calibration required and easy to clean and disinfect
• All conductivity scales included – EC, CF, PPM 500 (TDS), PPM 700
• Industry-leading five-year warranty for peace of mind
• Packaging may vary

Optimise nutrient levels

All plants need access to the correct amount of food (nutrients) so that they can grow and flourish. Over- or under-feeding your plants can result in the waste of expensive nutrient resources and plant health issues.

The simplest way to keep track of the amount of nutrients in your solution is to measure conductivity, which refers to the total ionic content (dissolved salts) in a solution. From a scientific perspective, when nutrients are added, this creates the potential for electricity to move through a solution, increasing the electrical conductivity.

By measuring and adjusting nutrient levels, you’ll ensure that your plants are getting the macro- and micro-nutrients they need for superior plant health.

A wider conductivity range to suit your needs

Tried and tested by growers worldwide, the Bluelab Commercial Truncheon Nutrient Meter is brilliantly simple, allowing you to measure and adjust nutrient levels for optimal plant performance.

What’s more, this meter has been specially designed for hydroponic crops that have higher-than-normal EC during their growing cycle, measuring up to 6.0 EC (60 CF, 3000 PPM 500 and 4200 PPM 700).

Built for growers

All our products are designed with growers, for growers - so you can be confident that the Bluelab Commercial Truncheon Nutrient Meter can withstand the knocks and drops that come with everyday growing. Designed and assembled in New Zealand from local and imported components.

Cover all the plant health fundamentals

As a grower, your solution’s pH (potential Hydrogen) is the most critical fundamental measurement to track. It plays a crucial role in making nutrients soluble in water so that they can be accessed by your plants.

The Bluelab pH Pen is an affordable and compact handheld solution for measuring pH and temperature on the go.

When you combine this pen with Bluelab’s Commercial Truncheon Nutrient Meter, you’ll be able to measure conductivity, temperature and pH, which not only enables you to actively manage your nutrient levels but also ensures that your plants have access to the food they need. Start tracking the fundamentals today.

The Bluelab Pro Controller Connect maintains consistent pH levels in your reservoir with automated dosing.

Features

• Monitor and automate nutrient and pH dosing in reservoirs when paired with Bluelab PeriPod dosers
• In-built safety lockouts prevent excessive dosing
• Auto-resume dosing after power loss
• View your reservoir parameters on your mobile phone no matter where you are
• Multi-part nutrient dosing possible with multiple PeriPods and Connect software
• Controls pH in the up (alkali) or down (acid) direction
• High and low alarms to alert you when parameters are out of range
• Dosing routine allows for effective mixing before next dose
• 2-metre/6-ft cable lengths for best positioning and viewing
• Flexible mounting options for walls, posts and racks
• Easy access to Bluelab Connect software (download here)
• Warranty - Two-year guarantee for the Bluelab Pro Controller; six-month guarantee for the Bluelab pH Probe (proof of purchase is required).

Save time and effort with the Bluelab Pro Controller

The Bluelab Pro Controller will maintain perfect and stable pH and nutrient levels in your reservoir, ensuring optimal nutrient availability for your plants at all times. Set your required targets for pH and conductivity and allow the controller to do the rest.

Since there’s no need for any spot checks or manual adjustments, the Bluelab Pro Controller saves you time and labour so that you can focus on growing healthier plants every single time.

When you pair your controller with high-precision Bluelab PeriPod dosers, you’ll have a complete nutrient dosing system. You can also connect other mains-powered pumps by using the Bluelab PowerPod.

Fine-tune your reservoir pH and nutrient

The Bluelab Pro Controller takes the complexity out of reservoir management, making precision easier than ever before.

The Bluelab Pro Controller is easy to use and programme, allowing you to choose the settings that work best for your growing setup; you can also adjust settings via Connect computer software. For pH, you can choose to adjust for either pH up (alkali) or pH down (acid). Our highly accurate Bluelab PeriPods will allow you to manage parameter increments down to 0.1 pH and 0.1 EC.

Plant-safe parameter management

The hard-working Bluelab Pro Controller has numerous safety features that have been designed to reduce the risk of overdosing or system malfunction.

You can set discreet visual high and low alarms for your preferred ranges for pH, conductivity and temperature; to help keep your plants safe from excessive doses, dosing will not occur whenever your controller is in alarm mode.

The automated dosing process allows for effective mixing before the next dose, ensuring that you never overshoot your pH or nutrient adjustments. 

View your data remotely

The Bluelab Pro Controller allows you to stay connected to your parameters 24/7, automatically delivering results even when you’re not there.

To connect, plug in the included Connect Stick and download our free Connect software. Once installed on your computer, you can set up an account for you and your team members to use. All they need to do is download the free Bluelab Connect mobile app and use the login to connect.

Not only will you be able to view the data being collected by your Bluelab Pro Controller and amend settings on your computer, you’ll also receive real-time notifications of alarms and lockout status updates.

The Bluelab Guardian Monitor Inline Connect is a continuous indicator of the current levels of EC, pH and temperature of your nutrient solution, enabling you to optimise these parameters as your crop progresses through each growing phase.

Features

• 24/7 monitoring of pH, EC and temperature directly in your irrigation and nutrient feed line
• View nutrient feed parameters on your mobile phone no matter where you are
• Large, backlit display for at-a-glance viewing
• High and low alarms to alert you when your parameters are out of range
• Robust inline pH probes can withstand line pressure and turbulence
• Easy screw fitment (1” NPT thread) to remove pH and conductivity probes for routine calibration and cleaning
• Easy pH calibration with on-screen instructions
• Flexible mounting options for walls, posts and racks
• Easy access to Bluelab Connect software (download here)
• Warranty - Two-year free repair or replacement guarantee for the Bluelab Guardian Monitor Connect Inline; six months for the Bluelab pH Probe.

Save time and effort with continuous monitoring

With the Bluelab Guardian Monitor Connect Inline, you will be able to continuously monitor pH, EC and temperature in your nutrient feed line. There’s no need for manual spot checks; instead, you’ll ensure that your nutrient delivery system is working optimally at all times.

That’s because when you track the three fundamental parameters of nutrient uptake, you’re able to spot and solve issues as and when they happen. After all, when you keep these parameters steady, you’ll end up with healthier plants.

Bold, bright and always on

The Bluelab Guardian Monitor Connect Inline’s large backlit LED display allows you to view your pH, EC and temperature at a glance.

You can also set discreet visual alarms for your preferred parameter ranges; these will let you know whenever your parameters are out of range. This ensures that you will always be on top of your nutrient feed line conditions.

Built for growers

All our products are built in New Zealand with growers, for growers – this means you can be confident that your water-resistant Bluelab Guardian Monitor Connect Inline can withstand the splashes that come with everyday growing. 

View your data remotely

To connect, you’ll need to purchase a Connect Stick and download our free Connect software. Once installed on your computer, you can set up an account for you and your team members to use. All they need to do is download the free Bluelab Connect mobile app and connect using the login. You can add multiple devices to the same account.

Not only will you be able to view the data being collected by your Bluelab Guardian Monitor Connect Inline, you’ll also receive real-time notifications of any alarms you have set up.

Increase range with the Connect Range Extender 2

While no calibration is required for conductivity and temperature, you will need to calibrate your monitor’s pH probe on a regular basis. Stock up on everything you need to clean, maintain and calibrate your probes by purchasing a Bluelab Probe Care Kit.

Working within a large growing facility? Use the Bluelab Connect Range Extender 2 to boost your wireless range, sending your Bluelab Connect data even further.

When you team up the Bluelab Connect Range Extender 2 with the Bluelab Connect Stick, you can increase the range between Bluelab Connect devices and your computer by up to four times.

Confidently automate pH and nutrient levels in growing reservoirs

Features

• Peristaltic pumps for accurate and consistent dosing of nutrient and pH into reservoirs
• For convenience, doser can be positioned lower than the injection point
• Quiet and fan-cooled for optimal performance
• Manual dosing from the unit to prime tubing
• 120ml/min pump flow rate
• Offers an ultra-compact solution for space-saving environments
• 4 metres/13 feet of tubing for dosing pH adjuster solution
• High-strength acid-/alkaline-resistant tubing for safe dosing of pH up or down
• 2x 4 metres/13 feet of food-grade tubing for dosing nutrient stock solution
• Opaque nutrient tubing to prevent algae growth
• Replaceable peristaltic pumps and tubing
• Rugged wall-mounted design for long-lasting efficiency
• PeriPods can be linked to create an expandable multi-part nutrient dosing system of up to 12 pumps*
• Please note: Only M series (M3 and M4) can be chained to together. L3 can only be chained to other L3s
• Two-year guarantee for the Bluelab PeriPod Pumps; a six-month guarantee for cassette and tubing (proof of purchase is required).

Create the optimal conditions for nutrient uptake

The Bluelab PeriPod M3 will maintain stable pH and nutrient levels in your reservoir, ensuring optimal nutrient availability for your plants at all times. Your PeriPod responds to triggers received from the Bluelab Pro Controller, dosing pH adjusters and nutrient stock solutions into your reservoir to achieve optimal conditions for nutrient uptake.

Since there’s no need for spot checks or manual adjustments, the Bluelab PeriPod M3 saves you time and labour so that you can focus on growing healthier plants every single time.

When you pair your controller with high-precision Bluelab PeriPod dosers, you’ll have a complete nutrient dosing system.

Fine-tune your reservoir pH and nutrient

The Bluelab PeriPod M3 features highly accurate medical-grade peristaltic pumps, making precision easier and more achievable than ever before.

Not only will the Bluelab PeriPod M3 allow you to manage parameter increments down to 0.1 pH and 0.1 EC, your pumps can be user-calibrated to the viscosity of the liquid being dosed, ensuring a consistent flow rate at all times.

In addition, your PeriPod’s pump tubes and cassettes are replaceable, providing long-lasting accuracy and saving you money in the long run.

Bluelab PeriPods are available in three different sizes; simply choose the correct pump size for your growing setup needs.

Team up with the Bluelab Pro Controller

This PeriPod has been designed to be paired with the Bluelab Pro Controller. This controller automatically monitors your parameters and sends signals to your PeriPod to the adjust pH and nutrient levels in your reservoir.

After all, when you keep your parameters steady, you’ll end up with healthier plants, improving both yield and quality.

You can also add the Bluelab External Lockout and Alarm Box to ensure that your dosing system is always working optimally or a Bluelab Sample Pot if your reservoir is located more than two metres/6.5 feet away from your Pro Controller.

Confidently automate pH and nutrient levels in growing reservoirs

Features

• Peristaltic pumps for accurate and consistent dosing of nutrient and pH into reservoirs
• For convenience, doser can be positioned lower than the injection point
• Quiet and fan-cooled for optimal performance
• Manual dosing from the unit to prime tubing
• 1200ml/min pump dose rate
• 4 metres/13 feet of tubing for dosing pH adjuster solution
• High-strength acid-/alkaline-resistant tubing for safe dosing of pH up or down
• 2x 4 metres/13 feet of food-grade tubing for dosing nutrient stock solution
• Opaque nutrient tubing to prevent algae growth
• eplaceable peristaltic pumps and tubing
• Rugged wall-mounted design for long-lasting efficiency
• PeriPods can be linked to create an expandable multi-part nutrient dosing system of up to 12 pumps*
• Please note: Only M series (M3 and M4) can be chained to together. L3 can only be chained to other L3s
• Warranty - Two-year guarantee for the Bluelab PeriPod Pumps; a six-month guarantee for cassette and tubing (proof of purchase is required)

Create the optimal conditions for nutrient uptake

The Bluelab PeriPod L3 will maintain stable pH and nutrient levels in your reservoir, ensuring optimal nutrient availability for your plants at all times. Your PeriPod responds to triggers received from the Bluelab Pro Controller, dosing pH adjusters and nutrient stock solutions into your reservoir to achieve optimal conditions for nutrient uptake.

Since there’s no need for spot checks or manual adjustments, the Bluelab PeriPod L3 saves you time and labour so that you can focus on growing healthier plants every single time.

When you pair your controller with high-precision Bluelab PeriPod dosers, you’ll have a complete nutrient dosing system.

Fine-tune your reservoir pH and nutrient

The Bluelab PeriPod L3 features highly accurate medical-grade peristaltic pumps, making precision easier and more achievable than ever before.

Not only will the Bluelab PeriPod L3 allow you to manage parameter increments down to 0.1 pH and 0.1 EC, your pumps can be user-calibrated to the viscosity of the liquid being dosed, ensuring a consistent flow rate at all times.

In addition, your PeriPod’s pump tubes and cassettes are replaceable, providing long-lasting accuracy and saving you money in the long run.

Bluelab PeriPods are available in three different sizes; simply choose the correct pump size for your growing setup needs.

Team up with the Bluelab Pro Controller

This PeriPod has been designed to be paired with the Bluelab Pro Controller. This controller automatically monitors your parameters and sends signals to your PeriPod to the adjust pH and nutrient levels in your reservoir.

After all, when you keep your parameters steady, you’ll end up with healthier plants, improving both yield and quality.

You can also add the Bluelab External Lockout and Alarm Box to ensure that your dosing system is always working optimally or a Bluelab Sample Pot if your reservoir is located more than two metres/6.5 feet away from your Pro Controller.

Confidently automate pH and nutrient levels in growing reservoirs

Features

• Peristaltic pumps for accurate and consistent dosing of nutrient and pH into reservoirs
• For convenience, doser can be positioned lower than the injection point
• Quiet and fan-cooled for optimal performance
• Manual dosing from the unit to prime tubing
• 120ml/min flow rate
• M3 and M4 sizes offer an ultra-compact solution for space-saving environments
• 4 metres/13 feet of tubing for dosing pH adjuster solution
• High-strength acid-/alkaline-resistant tubing for safe dosing of pH up or down
• 3x 4 metres/13 feet of food-grade tubing for dosing nutrient stock solution
• Opaque nutrient tubing to prevent algae growth
• Replaceable peristaltic pumps and tubing
• Rugged wall-mounted design for long-lasting efficiency
• PeriPods can be linked to create an expandable multi-part nutrient dosing system of up to 12 pumps*
• Please note: Only M series (M3 and M4) can be chained to together. L3 can only be chained to other L3s
• Two-year guarantee for the Bluelab PeriPod Pumps; a six-month guarantee for cassette and tubing (proof of purchase is required).

Create the optimal conditions for nutrient uptake

The Bluelab PeriPod M4 will maintain stable pH and nutrient levels in your reservoir, ensuring optimal nutrient availability for your plants at all times. Your PeriPod responds to triggers received from the Bluelab Pro Controller, dosing pH adjusters and nutrient stock solutions into your reservoir to achieve optimal conditions for nutrient uptake.

Since there’s no need for spot checks or manual adjustments, the Bluelab PeriPod saves you time and labour so that you can focus on growing healthier plants every single time.

When you pair your controller with high-precision Bluelab PeriPod dosers, you’ll have a complete nutrient dosing system.

Fine-tune your reservoir pH and nutrient

The Bluelab PeriPod M4 features highly accurate medical-grade peristaltic pumps, making precision easier and more achievable than ever before.

Not only will the Bluelab PeriPod M4 allow you to manage parameter increments down to 0.1 pH and 0.1 EC, your pumps can be user-calibrated to the viscosity of the liquid being dosed, ensuring a consistent flow rate at all times.

In addition, your PeriPod’s pump tubes and cassettes are replaceable, providing long-lasting accuracy and saving you money in the long run.

Bluelab PeriPods are available in three different sizes; simply choose the correct pump size for your growing setup needs.

Team up with the Bluelab Pro Controller

This PeriPod has been designed to be paired with the Bluelab Pro Controller. This controller automatically monitors your parameters and sends signals to your PeriPod to the adjust pH and nutrient levels in your reservoir.

After all, when you keep your parameters steady, you’ll end up with healthier plants, improving both yield and quality.

You can also add the Bluelab External Lockout and Alarm Box to ensure that your dosing system is always working optimally or a Bluelab Sample Pot if your reservoir is located more than two metres/6.5 feet away from your Pro Controller.

Dependable temperature probe technology that's built to last

Features

• For use with Bluelab pH Controller and Bluelab Pro Controller
• Measure temperature of solutions to ±0.1°C/°F in reservoirs
• Fully waterproof and can be submerged in reservoirs
• Robust stainless-steel construction
• Effective in nutrient solution
• Fast sensor response for quick and accurate measurements
• Easy to clean and maintain
• Low maintenance – no calibration needed
• 2-metre/6.56-foot standard cable for measuring in hard-to-reach places
• Two-year warranty for complete peace of mind
• Warranty - Two-year guarantee for the Bluelab Pro Controller or pH Controller Temperature Probe (proof of purchase is required).

Unlock your plant health fundamentals

Temperature is a key plant health fundamental, as it plays a pivotal role in your plants’ growth rate as well as their structure. Temperature also affects important plant processes, such as flowering and pollination.

That’s why you need to regularly measure the temperature within your plants’ growing environment. If it’s too warm, this could lead to oxygen deficiency and root infection. If it’s too cold, this could shock the roots, which may hinder plant growth.

Get the fundamentals of growing right by regularly measuring temperature to ensure that this is always within the correct range.

Accurate temperature measurements

The Bluelab Temperature Probe has been specially designed for use with the Bluelab pH Controller, Bluelab pH Controller Connect and Bluelab Pro Controller Connect. This reliable probe accurately measures the temperature of your nutrient solution.

Bluelab conductivity and pH measurements also use the temperature probe to automatically compensate readings for temperature, ensuring accurate measurements at all times.

Built for growers

All our products are designed with growers, for growers – so you can be confident that the Bluelab Temperature Probe will help you carry out essential tasks with ease. Built in New Zealand, this probe has a two-year guarantee. Designed and assembled in New Zealand from local and imported components.

• Case of six bottles
• Contains 500 ml/16.9 fl oz
• Improve EC/PPM accuracy with regular cleaning
• Warranty - There is currently no applicable warranty for this product.

The Grower's Toolbox helps you to measure the fundamental crop parameters; pH, conductivity and temperature. In the box, you'll also find care solutions and a link to Bluelab's Grow Book ??? your guide to more efficient growth of stronger, healthier plants curated from over 30 years of experience.

Features

• Your toolbox contains: Bluelab pH Pen, Bluelab Conductivity Pen, Bluelab Grow Book, Bluelab Probe Care Kit – pH and Conductivity
• Measure pH, conductivity and temperature in solutions
• Care, clean and calibrate your products with the Bluelab Probe Care Kit
• Bluelab pH Pen is easy and fast to calibrate for ongoing accuracy
• Fully waterproof pens, not just water-resistant
• Bluelab Conductivity Pen has a flat electrode for easier cleaning
• Hold reading function to capture every measurement with ease
• Automatic temperature compensation for accurate readings anywhere
• Auto-off function to extend battery life
• 1 x AAA battery included with each pen, getting you started immediately
• One-year peace-of-mind warranty

Take care of all the fundamentals for thriving plant health

The fundamental parameters of pH, conductivity and temperature all play a pivotal role in driving optimal plant health. With the Bluelab Grower’s Toolbox, you’ll have everything you need to measure the fundamentals in one box.

While conductivity indicates the total amount of nutrients in your solution, pH (potential Hydrogen) shows how acidic or alkaline your medium is, which determines nutrient absorption. Temperature affects your plants’ growth rate and structure.

Get these fundamentals right from the very start by regularly measuring pH, conductivity and temperature to ensure that these are always within the correct range.

Handheld cleaning and calibration

The Bluelab Grower’s Toolbox contains everything you need to master the fundamentals. Not only will you get the Bluelab Conductivity Pen and Bluelab pH Pen, but you’ll also receive our Grow Book, which is full of information about growing healthier plants.

A Bluelab Probe Care Kit is also included, which contains sachets of pH 4.0, pH 7.0 and KCl solutions for calibrating and storing your pH Pen, as well as 2.77 EC standard solution for testing your Conductivity Pen after cleaning. This kit also includes probe cleaner and cleaning instruments.

Lastly, your toolbox includes a grower’s wall chart, which shows the preferred pH ranges for different crop types.

Accurate and customisable measurements

Providing accurate readings at the click of a button, you can rest assured that the user-friendly Bluelab Conductivity Pen and Bluelab pH Pen will give you reliable results, every single time.

In addition, these pens offer a range of in-built measurement units; for conductivity, you can choose between EC, CF, PPM 500 (TDS) or PPM 700; for temperature, you can select ??C or ??F.

Built for growers

All our products are designed with growers, for growers – so you can be confident that our robust handheld pens will help you carry out the essential tasks of everyday growing with ease. Designed and assembled in New Zealand from local and imported components.

• Contains 250 ml/8.4 fl oz 
• Compatible for use with Bluelab pH pens, Bluelab soil pH pens, Bluelab pH probes and Bluelab soil pH probes 
• Warranty - There is currently no applicable warranty for this product.

A replacement conductivity probe for the Bluelab Pro Controller

Features

• Easy to clean
• Low maintenance
• Fully submersible probe
• 2-metre/6.56-foot standard cable
• Warranty - Two-year guarantee for the Bluelab Pro Controller Conductivity Probe (proof of purchase is required).

• Robust and reliable construction for long-lasting value
• Fully waterproof; splash, submerge or sink - we've got you covered
• Automatically detects liquids and bright LEDS indicate measurement for brilliantly simple functionality
• Long-format design for mixing and measuring nutrient reservoirs simultaneously
• No calibration required and easy to clean and disinfect
• All conductivity scales included – EC, CF, PPM 500 (TDS), PPM 700
• Industry-leading five-year warranty for peace of mind
• Packaging may vary 
• Warranty - Comes with a 5-year limited written warranty. Proof of purchase required.

The simplest way to keep track of the amount of nutrients in your solution is to measure conductivity, which refers to the total ionic content (dissolved salts) in a solution. From a scientific perspective, when nutrients are added, this creates the potential for electricity to move through a solution, increasing the electrical conductivity.

By measuring and adjusting nutrient levels, you’ll ensure that your plants are getting the macro- and micro-nutrients they need for superior plant health.

The Bluelab Truncheon Nutrient Meter may have been designed for everyday use, but we guarantee that it’ll become your growing companion for life.

All our products are designed with growers, for growers - so you can be confident that the Bluelab Truncheon Nutrient Meter can withstand the knocks and drops that come with everyday growing. Designed and assembled in New Zealand from local and imported components.

As a grower, your solution’s pH (potential Hydrogen) is the most critical fundamental measurement to track. It plays a crucial role in making nutrients soluble in water so that they can be accessed by your plants.

The Bluelab pH Pen is an affordable and compact handheld solution for measuring pH and temperature on the go.

When you combine this pen with Bluelab’s Truncheon Nutrient Meter, you’ll be able to measure conductivity, temperature and pH, which not only enables you to actively manage your nutrient levels but also ensures that your plants have access to the food they need. Start tracking the fundamentals today.

The Bluelab Guardian Monitor is a continuous indicator of the current levels of EC, pH and temperature of your nutrient solution, enabling you to optimise these parameters as your crop progresses through each growing phase.

Features

• 24/7 continuous monitoring of pH, EC and temperature in reservoirs
• Large, backlit display for at-a-glance viewing
• High and low alarms to alert you when parameters are out of range
• Easy pH calibration function with on-screen instructions
• 2-metre cable lengths for best positioning and viewing
• Flexible mounting options for walls, posts and racks
• Easy-to-clean display built for clean environments
• Warranty - Two-year guarantee for the Bluelab Guardian Monitor; six-month guarantee for the Bluelab pH Probe (proof of purchase is required).

Save time and effort with the Bluelab Guardian Monitor

With the Bluelab Guardian Monitor, you will be able to continuously monitor the key parameters of pH, EC and temperature. There’s no need for manual measurements and spot checks; instead, you will only need to adjust for pH and nutrient.

When you consistently track the three fundamental parameters of nutrient uptake, you’ll be able to spot any fluctuations, allowing you to solve issues as and when they happen. After all, when you keep these parameters steady, you’ll end up with healthier plants.

Save time and labour with the Bluelab Guardian Monitor so that you can focus on growing great plants every single time.

Bold, bright and always on

The Bluelab Guardian Monitor’s large backlit LED display allows you to view your pH, EC and temperature at a glance.

You can also set discreet visual alarms for your preferred parameter ranges; these will let you know whenever your parameters are out of range. This ensures that you will always be on top of your reservoir conditions.

Built for growers

All our products are built in New Zealand with growers, for growers – this means you can be confident that your water-resistant Bluelab Guardian Monitor can withstand the splashes that come with everyday growing. Designed and assembled in New Zealand from local and imported components.

Stay connected to your parameters

While no calibration is required for conductivity and temperature, you will need to calibrate your monitor’s pH probe on a regular basis. Stock up on everything you need to clean, maintain and calibrate your probes by purchasing a Bluelab Probe Care Kit.

If you need to access your plant parameters remotely, why not consider upgrading to the Bluelab Guardian Monitor Connect? With our free Connect software, you can stay connected to your crops 24/7.

Not only will you be able to view the data being collected by your on-site Bluelab products, you’ll also receive real-time notifications of any alarms you have set up. Get connected today.

The Bluelab Guardian Monitor is a continuous indicator of the current levels of EC, pH and temperature of your nutrient solution, enabling you to optimise these parameters as your crop progresses through each growing phase.

Features

• View your reservoir parameters on your mobile phone no matter where you are
• 24/7 continuous monitoring of pH, EC and temperature in reservoirs
• Large, backlit display for at-a-glance viewing
• High and low alarms to alert you when parameters are out of range
• Easy pH calibration function with on-screen instructions
• 2-metre cable lengths for best positioning and viewing
• Flexible mounting options for walls, posts and racks
• Easy access to Bluelab Connect software (download here)
• Warranty - Two-year guarantee for the Bluelab Guardian Monitor Connect; six-month guarantee for the Bluelab pH Probe (proof of purchase is required).

Save time with the Bluelab Guardian Monitor Connect

With the Bluelab Guardian Monitor Connect, you will be able to continuously monitor pH, EC and temperature in your reservoir. There’s no need for manual measurements and spot checks; instead, you will only need to adjust for pH and nutrient.

When you consistently track the three fundamental parameters of nutrient uptake, you’ll be able to spot any fluctuations, allowing you to solve issues as and when they happen. After all, when you keep these parameters steady, you’ll end up with healthier plants.

Bold, bright and always on

The Bluelab Guardian Monitor Connect’s large backlit LED display allows you to view your pH, EC and temperature at a glance.

You can also set discreet visual alarms for your preferred parameter ranges; these will let you know whenever your parameters are out of range. This ensures that you will always be on top of your reservoir conditions.

Built for growers

All our products are built in New Zealand with growers, for growers – this means you can be confident that your water-resistant Bluelab Guardian Monitor Connect can withstand the splashes that come with everyday growing. Designed and assembled in New Zealand from local and imported components.

View your data remotely

The Bluelab Guardian Monitor Connect allows you to stay connected to your crops 24/7.

To connect, you’ll need to purchase a Connect Stick and download our free Connect software. Once installed on your computer, you can set up an account for you and your team members to use. All they need to do is download the free Bluelab Connect mobile app and connect using the login. You can add multiple devices to the same account.

Not only will you be able to view the data being collected by your Bluelab Guardian Monitor Connect, you’ll also receive real-time notifications of any alarms you have set up. Get connected today.

Increase range with the Connect Range Extender 2

While no calibration is required for conductivity and temperature, you will need to calibrate your monitor’s pH probe on a regular basis. Stock up on everything you need to clean, maintain and calibrate your probes by purchasing a Bluelab Probe Care Kit.

Working within a large growing facility? Use the Bluelab Connect Range Extender 2 to boost your wireless range, sending your Bluelab Connect data even further.

When you team up the Bluelab Connect Range Extender 2 with the Bluelab Connect Stick, you can increase the range between Bluelab Connect devices and your computer by up to four times.

Boost the wireless range between Bluelab Connect products

Features

• Increases Connect wireless range by a further 100 metres/330 feet (typically indoors)
• Link multiple Range Extenders for extra-long range (up to 700 metres/2300 feet)
• Water resistant for peace of mind
• International power supply included for easy use anywhere
• Easy access to Bluelab Connect software (download here)
• Two-year guarantee for the Bluelab Connect Range Extender 2 (proof of purchase is required).

Send your Connect data further

If you’re currently working within a large growing facility or environment, you can use the Bluelab Connect Range Extender 2 to boost your range, sending your Bluelab Connect wireless data even further.

All you need to do is plug the Bluelab Connect Range Extender 2 into a power supply between Bluelab Connect devices and Bluelab Connect Stick 1 or 2 to increase the wireless signal range.

When you team up the Bluelab Connect Range Extender 2 with the Bluelab Connect Stick 2, you can increase the wireless range between Bluelab Connect devices and your computer by up to four times.

Take your growing to the next level

Our Connect software allows you to stay connected to your plants 24/7. You can view the data being collected by your Bluelab devices on your computer or mobile device, enabling you to act quickly and take your growing to the next level.

Built for growers

All our products are designed with growers, for growers; in fact, the Bluelab Connect Range Extender 2 is water resistant, protecting it from the splashes that come with everyday growing. Designed and assembled in New Zealand from local and imported components.

Tried and trusted by growers all over the world, the Bluelab Connect Range Extender 2 comes with a two-year guarantee.

Boosting your wireless coverage

Dealing with extra-long distances in your growing environment? You can use multiple Bluelab Connect Range Extender 2s to increase your wireless coverage by up to 700 metres or 2300 feet.

However, please note that your wireless range can be affected by walls, plant canopies and other structures.

The Bluelab Connect Range Extender 2 can be used with all of the following products: Bluelab Guardian Monitor Connect, Bluelab Guardian Monitor Connect Inline, Bluelab pH Controller Connect, Bluelab Pro Controller Connect and Bluelab Connect Stick 1 and 2.

Remote monitoring for complete peace of mind

Features

• Receive wireless data from Bluelab Connect devices to your computer and smartphone
• View data and device status remotely (required: computer with permanent internet access)
• View data and get alerts on your smartphone or tablet
• Send wireless data up to 100 m/330 ft (typically indoors)
• Send wireless data up to 400 m/1312 ft in open space (line of sight)
• Receive data from up to 50 Connect devices with one Connect Stick
• Easy access to Bluelab Connect software (download here)
• Warranty - Two-year guarantee for Bluelab Connect Stick 2 (proof of purchase is required).

Stay connected whenever you leave your crops

With the Bluelab Connect Stick 2, you’ll be able to improve crop performance and reduce errors. What’s more, through the power of data and remote monitoring, you can stay connected to your crops - even when you’re on holiday.   To connect, simply download our free Connect software. Once installed on your computer, set up an account for you and your team members to use. All they need to do is download the Bluelab Connect mobile app.

Not only will you be able to view the data being collected by your Connect devices, you’ll also receive notifications of any alarms you have set up.

Take your growing to the next level

The Bluelab Connect Stick 2, coupled with our powerful Connect software, allows you to stay connected to your facility and plants 24/7.

You’ll be able to consistently track your fundamental parameters, allowing you to spot any fluctuations so that you can solve issues as and when they happen. After all, when you keep your growing parameters steady, you’ll end up with healthier plants.

Built for growers

All our products are designed with growers, for growers – so you can be confident that the Bluelab Connect Stick 2 will help you carry out the essential tasks of everyday growing with ease. Designed and assembled in New Zealand from local and imported components.

Boost your wireless coverage

Dealing with extra-long distances in your growing environment? You can use multiple Bluelab Connect Range Extender 2s to increase your wireless coverage by up to 700 metres or 2300 feet.

However, please note that your wireless range can be affected by walls, plant canopies and other structures.

The Bluelab Connect Stick 2 can be used with all of the following products: Bluelab Guardian Monitor Connect, Bluelab Guardian Monitor Connect Inline, Bluelab pH Controller Connect, Bluelab Pro Controller Connect and Bluelab Connect Range Extender 1 and 2.

Your Bluelab Probe Care Kit – Conductivity contains: 

• Probe care instructions 
• Two 18 ml single-use sachets of Bluelab 2.77 EC Conductivity Standard Solution 
• One plastic cup 
• Bluelab Conductivity Probe Cleaner 
• Chamois for cleaning your conductivity probe 
• Packaging may vary
• Warranty - There is currently no applicable warranty for this product.

• Contains 120 ml/ 4.06 fl oz 
• Compatible for use with Bluelab pH pens, Bluelab soil pH pens, Bluelab pH probes and Bluelab soil pH probes
• Warranty - There is currently no applicable warranty for this product.